Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #1: Mon May 15 07:32:42 UTC 2006
    technix@amateria:/usr/obj/usr/src/sys/FRENZY
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1802.32-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
real memory  = 1610285056 (1535 MB)
avail memory = 1564663808 (1492 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
netsmb_dev: loaded
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA K8T800Pro host to PCI bridge> mem 0xcc000000-0xcfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0x8400-0x847f mem 0xfb500000-0xfb5007ff irq 16 at device 7.0 on pci0
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:0d:27:d0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x5e135000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:0d:27:d0
fwe0: Ethernet address: 02:11:d8:0d:27:d0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0x9400-0x943f,0x9000-0x900f,0x8800-0x887f mem 0xfb700000-0xfb700fff,0xfb600000-0xfb61ffff irq 18 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
skc0: <Marvell Gigabit Ethernet> port 0x9800-0x98ff mem 0xfb900000-0xfb903fff irq 17 at device 10.0 on pci0
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:d8:82:c7:d2
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [GIANT-LOCKED]
pci0: <multimedia> at device 12.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0xa000-0xa01f irq 19 at device 14.0 on pci0
pcm0: <eMicro EM28028 AC97 Codec>
atapci1: <VIA 6420 SATA150 controller> port 0xc400-0xc407,0xc000-0xc003,0xb800-0xb807,0xb400-0xb403,0xb000-0xb00f,0xa800-0xa8ff irq 20 at device 15.0 on pci0
ata5: <ATA channel 0> on atapci1
ata6: <ATA channel 1> on atapci1
atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 3
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1802318861 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IPsec: Initialized Security Association Processing.
ncp_load: loaded
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
md0: Preloaded image </boot/frenzyroot> 2097152 bytes at 0xc0d21e44
ad0: 152627MB <WDC WD1600JB-00EVA0 15.05R15> at ata0-master UDMA100
acd0: DVDR <NEC DVD RW ND-4551A/1-07> at ata1-master UDMA33
ad4: 190782MB <WDC WD2000JD-00HBB0 08.02D08> at ata2-master SATA150
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <JetFlash TS512MJF110 0.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 496MB (1015808 512 byte sectors: 64H 32S/T 496C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-4551A 1-07> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: cd present [98361 x 2048 byte records]
Trying to mount root from ufs:/dev/md0
md1.uzip: 4177 x 130560 blocks